Bourbon Barrel Top, Cleaned

********These tops are USED and NOT in perfect condition********
********They will NOT hold together without a backing********
The cheaper the top the WORSE condition you will receive. Please READ the description for the top you are purchasing BEFORE checking out!
All of our tops come from real authentic bourbon barrels and have been used to distill bourbon. These tops are sold as is straight off of the barrel. The only thing we do to them is clean them. All barrels and barrel heads are different! Some of them might be a little bigger or smaller than others. They may not look exactly like the ones in the photos. They all have some imperfections, which include, but are not limited to, cracks, checks, discoloration, missing pieces, gaps in the wood, and some may not lay perfectly flat. This happens after a barrel has been dried out after years of being soaked in bourbon.
This item is for a REAL USED bourbon barrel head / top. We take a wire wheel brush to clean off all the loose char, dirt, and grime. These are NOT sanded, so you will need to sand them yourself and receiving. Each top is different, but they measure approximately 21 inches in diameter and about an inch thick, each top weighs roughly 10 pounds each. Tops may or may not have bung holes in them.

We have a variety of options to choose from:
* Top with a back: We will add the backer board for you. The back is made from 3/8" plywood and painted black, so they don't show from the sides.
* Rough Top: Certain boards won't lock or fit together the properway, or there may be large chunks missing or cracks between the boards, or could have giant humps. These tops are great for projects where you are using pieces of the top for different projects. These are the tops that we can't use to make furniture with. They all have cracks, bumps, or could be held together with dowel rods or broken joints that won't fitgo together at all. Some may have bung holes or multiple bung holes.
* Blank Top: Won't have any markings on it at all. Pieces might not lock together, but will fit in place, and may or may not have slight humping on boards.
* Stamped Tops: Will have a distillery stamp from one of the more common distilleries we get our tops from. The stamps are placed on there while the tops are at the distillery. Some may be more legible and clearer than others, and some might be larger or smaller than others. Depends on stock available. Pieces will fit together but might not lock into place and may have slight bumping on boards.
Most of our bourbon barrel parts come from either Jim Beam or Clermont Springs distilleries, these are the tops used for this item. If you want a different distillery stamp, message me and I can see if we have any available, we charge EXTRA for special distillery stamp tops because they are harder to find.
* Box of Parts: This box will weigh at least 10 pounds and have various pieces and parts that are left over from what we used to make items. The pieces will not form a full top, they will be mixed and matched, some might have part of a distillery stamp on them, some might not, some might be the rounded edge from a top, and some could be the long skinny or thick and wide pieces from the inside of the top.

We try to ship out items within 3-5 business days, but, depending on stock available, it could take up to 2 weeks.

********NOTE********
Shipping to Alaska and Hawaii costs extra.
Message me with your address and I will get you an exact price.